Refurbished PHYSIO-CONTROL Lucas 2

Stryker Physio-Control LUCAS 2 Features:
Chest Compression System: Designed for use in patients experiencing sudden cardiac arrest, providing high-quality, consistent chest compressions to improve circulation and increase the chances of a successful outcome.
High-Quality Compression: Performs chest compressions at a rate of 100 compressions per minute.
Portable and Lightweight: Comes in a backpack for easy application to the patient, making it convenient for emergency responders.
No Electricity Required: Operates without the need for electrical supply, powered by breathing oxygen or air from a wall outlet.
Consistent Performance: Maintains consistent chest compression over a long period without fatigue.
Stryker Physio-Control LUCAS 2 Specifications:
Dimensions:
Height: 22 (57 cm)
Width: 20.5 (52 cm)
Depth: 9.4 (24 cm)
Weight: 17.2 lbs (7.8 kg)
Patient Types:
Suitable for adult patients with a sternum height of 6.7 to 11.9 inches (170 to 303 mm) and a maximum chest width of 17.7 inches (449 mm).
Not restricted by patient weight.
Compressions:
Compression Depth: 1.5 to 2.0 inches (4 to 5 cm) from the Start Position
Compression Frequency: 100 ± 5 compressions per minute
Compression Duty Cycle: 50 ± 5%
Compression Modes: Operator-selectable modes include 30:2 (30 compressions followed by a 3 seconds ventilation pause) and Continuous compressions.
Battery:
Type: Rechargeable Lithium-Ion Polymer (LiPo)
Capacity: 3300 mAh (typical), 86 Wh
Battery Voltage (nominal): 25.9 V
Initial Battery Runtime: Approximately 45 minutes (typical)
Maximum Battery Charge Time: Less than 4 hours at room temperature
Replacement Interval: Recommendation to replace the battery every 3 years or after 200 uses of more than 10 minutes each time.
Environmental:
Operating Temperature: +32°F to +104°F / +0°C to +40°C
Storage Temperature: -4°F to +158°F / -20°C to +70°C
Relative Humidity: 5% to 98%, non-condensing
IP Classification: IP 43
Operating Input Voltage: 12-24 V DC