Used MJ RESEARCH PTC-100
FOR SALE
Condition:
UsedShipping from:
USA
Sales area:
Secure Transaction via Bimedis platform
More details
Protection of Buyer's and Seller's Rights
Safe Payment
Personal multilingual support
Product Details
| PTC-100 |
| MJ RESEARCH |
| PCR Thermal Cycler |
| 03.10.2025 |
| 73 |
Product Description
The MJ Research PTC-100 is a robust thermocycler that provides solutions for various temperature configuration needs. This instrument comes in versions that use of 96-well or 60-well microplates, as well as a heated lid for oil-free operation. The Hot Bonnet heated lid fitted in each unit has a thumbwheel that allows for the convenient adjustment of height and pressure. The modification feature ensures the tight sealing of reaction vessels ¬and microplates ¬ during oil-free thermal cycling.
96 Well Block
The Precise Peltier-effect heat pumps of PTC-100 thermocyclers were crafted to withstand repeated cycling. Any temperature sequence can be cycled up to 10,000 times. The NIST-traceable calibration feature of this instrument allows for the indefinite storing of material at any temperature. As a result, incubation rates are highly accurate. This calibration feature is also responsible for the refrigeration of results after unsupervised runs.
Data storage is secured and hassle-free with MJ Research PTC-100 thermocyclers. Memory stores approximately 320 programs, and the cycler comes with 14 pre-programmed protocols. Any sequence of temperatures can be cycled up to 10,000 times. Ramping rates less than maximum can also be specified. Data which were not properly stored due to power interruptions are safe for up to twelve hours with the PTC-100’s power-failure protection feature.
Specifications:
Thermal range: 0–100°C electronically (with Peltier-effect heat pumps)
Accuracy: ±0.5°C of programmed target at 60°C
Thermal homogeneity: ±0.4°C well to well within 30 seconds of arrival at 60°C
16MS slide block: ±0.4°C within 30 seconds of arrival at 90°C
Ramping rate
60-well block: up to 1°C/sec
96-well: up to 1.2°C/sec
96AgV: gold/silver block up to 2.5°C/sec
16MS Slide Block: up to 0.5°C/sec
Sample Capacity
Dimensions (H x W x D): 45 in. x 30 in. x 39 in.
60-well block: Sixty x 0.5ml tubes
96-well block, 96AgV gold/silver block: 96 x 0.2ml tubes or one 96-well plate
16MS Slide Block: Sixteen 25 x 75mm slides and 24 x 0.2ml tubes
Line voltage: 100–240VAC rms (no adjustment needed among voltages within these ranges)
Frequency: 350W maximum (momentary 4.5 A)
Fuses: Two 4A, 5 x 20mm (4 ampere)
Displays: One 2 x 16 LCD alphanumeric display
Ports: One 25-pin 8-bit parallel interface printer port
96 Well Block
The Precise Peltier-effect heat pumps of PTC-100 thermocyclers were crafted to withstand repeated cycling. Any temperature sequence can be cycled up to 10,000 times. The NIST-traceable calibration feature of this instrument allows for the indefinite storing of material at any temperature. As a result, incubation rates are highly accurate. This calibration feature is also responsible for the refrigeration of results after unsupervised runs.
Data storage is secured and hassle-free with MJ Research PTC-100 thermocyclers. Memory stores approximately 320 programs, and the cycler comes with 14 pre-programmed protocols. Any sequence of temperatures can be cycled up to 10,000 times. Ramping rates less than maximum can also be specified. Data which were not properly stored due to power interruptions are safe for up to twelve hours with the PTC-100’s power-failure protection feature.
Specifications:
Thermal range: 0–100°C electronically (with Peltier-effect heat pumps)
Accuracy: ±0.5°C of programmed target at 60°C
Thermal homogeneity: ±0.4°C well to well within 30 seconds of arrival at 60°C
16MS slide block: ±0.4°C within 30 seconds of arrival at 90°C
Ramping rate
60-well block: up to 1°C/sec
96-well: up to 1.2°C/sec
96AgV: gold/silver block up to 2.5°C/sec
16MS Slide Block: up to 0.5°C/sec
Sample Capacity
Dimensions (H x W x D): 45 in. x 30 in. x 39 in.
60-well block: Sixty x 0.5ml tubes
96-well block, 96AgV gold/silver block: 96 x 0.2ml tubes or one 96-well plate
16MS Slide Block: Sixteen 25 x 75mm slides and 24 x 0.2ml tubes
Line voltage: 100–240VAC rms (no adjustment needed among voltages within these ranges)
Frequency: 350W maximum (momentary 4.5 A)
Fuses: Two 4A, 5 x 20mm (4 ampere)
Displays: One 2 x 16 LCD alphanumeric display
Ports: One 25-pin 8-bit parallel interface printer port