Used AGILENT G1330B 1290 Series
FOR SALE
Condition:
UsedWarranty (month):
1Availability:
In stockShipping from:
USA
Sales area:
2 001
(plus shipping costs and VAT)
Price in seller currency:
2 500Seller:
Product Details
Product Description
Agilent 1290 Infinity G1330B Thermostat
**This unit has been tested for basic power function. See photos for details.
The Agilent 1290 Infinity Thermostat is designed for use with other modules of the Agilent 1200 Infinity Series or with other LC systems if adequate remote control inputs and outputs are available. The thermostat is controlled from the Agilent 1200 Infinity Series Instant Pilot or from your Agilent control software for LC systems.
The thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and then blows it through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how many vials are in the tray. In cooling mode condensation is generated on the cooled side of the Peltier elements. This condensed water is safely guided into the leak system.
The thermostat is equipped with a cooling/heating module which uses Peltier elements for efficient air cooling. When turned on the front side of the Peltier elements is heated/cooled according to the temperature setting.
Manufacturers Specifications:
Power consumption: 260 VA / 210 W / 717 BTU Maximum
Ambient operating temperature: 4 - 40 В°C (39 - 104 В°F)
Ambient non-operating temperature: -40 - 70 В°C (-40 - 158 В°F)
Humidity < 95 % r.h. at 40 В°C (104 В°F) Non-condensing
Operating altitude Up to 2000 m (6562 ft)
Non-operating altitude Up to 4600 m (15091 ft) For storing the module
Safety standards: IEC, CSA, UL Installation category II, Pollution degree 2 For indoor use only
**This unit has been tested for basic power function. See photos for details.
The Agilent 1290 Infinity Thermostat is designed for use with other modules of the Agilent 1200 Infinity Series or with other LC systems if adequate remote control inputs and outputs are available. The thermostat is controlled from the Agilent 1200 Infinity Series Instant Pilot or from your Agilent control software for LC systems.
The thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and then blows it through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how many vials are in the tray. In cooling mode condensation is generated on the cooled side of the Peltier elements. This condensed water is safely guided into the leak system.
The thermostat is equipped with a cooling/heating module which uses Peltier elements for efficient air cooling. When turned on the front side of the Peltier elements is heated/cooled according to the temperature setting.
Manufacturers Specifications:
Power consumption: 260 VA / 210 W / 717 BTU Maximum
Ambient operating temperature: 4 - 40 В°C (39 - 104 В°F)
Ambient non-operating temperature: -40 - 70 В°C (-40 - 158 В°F)
Humidity < 95 % r.h. at 40 В°C (104 В°F) Non-condensing
Operating altitude Up to 2000 m (6562 ft)
Non-operating altitude Up to 4600 m (15091 ft) For storing the module
Safety standards: IEC, CSA, UL Installation category II, Pollution degree 2 For indoor use only